PCA9306DP1,125, Транслятор уровня напряжения, 2 входа, 1В до 3.6В, TSSOP-8

The PCA9306DP1.125 is a dual bi-directional I?C-bus and SMBus voltage-level translator with an enable (EN) input. It allows bi-directional voltage translations between 1 and 5V without the use of a direction pin. The low ON-state resistance (RON) of the switch allows connections to be made with minimal propagation delay. When EN is high, the translator switch is on and the SCL1 and SDA1 I/O are connected to the SCL2 and SDA2 I/O, respectively, allowing bi-directional data flow between ports. When EN is low, the translator switch is off and a high-impedance state exists between ports.

• Bidirectional voltage translation with no direction pin
• low 3.5R ON-state connection between input and output ports provides less signal distortion
• Lock-up free operation
• Flow through pinout for ease of printed-circuit board trace routing
• ESD protection exceeds 2000V HBM per JESD22-A114 and 1000V CDM per JESD22-C101

Полупроводники - Микросхемы\Логика\Схемы Сдвига Уровня

Технические параметры