SN74AVC4T245PW, Приемопередатчик по шине, AVC семейство, 4 входа, 12мА, 3.1нс, 380МБ/с, 1.2В до 3.6В, TSSOP-16

The SN74AVC4T245PW is a 4-bit dual-supply Bus Transceiver with configurable voltage-level shifting and 3-state outputs. The SN74AVC4T245 device is designed for asynchronous communication between two data buses. The logic levels of the direction-control (DIR) input and the output-enable (OE) input activate either the B-port outputs or the A-port outputs or place both output ports into the high-impedance mode. The device transmits data from the A-bus to the B-bus when the B-port outputs are activated and from the B-bus to the A-bus when the A-port outputs are activated. The input circuitry on both A and B ports is always active and must have a logic high or low level applied to prevent excess ICC and ICCZ.

• Control inputs VIH/VIL levels are referenced to VCCA voltage
• Overvoltage-tolerant inputs and outputs allow mixed-voltage-mode data communications
• Fully configurable dual-rail design
• IOFF supports partial-power-down mode operation
• I/Os are 4.6V tolerant
• Latch-up performance exceeds 100mA per JESD 78
• ESD protection exceeds JESD 22
• Green product and no Sb/Br

Полупроводники - Микросхемы\Логика\Схемы Сдвига Уровня

Технические параметры