TXS0108EZXYR, Транслятор уровня напряжения, 8 входов, 4.8нс, 1.2В до 5.5В, UFBGA-20

The TXS0108EZXYR is a 8-bit Non-inverting Translator uses two separate configurable power-supply rails. The A port tracks the VCCA pin supply voltage. The VCCA pin accepts any supply voltage between 1.2 and 3.6V. The B port tracks the VCCB pin supply voltage. The VCCB pin accepts any supply voltage between 1.65 and 5.5V. When the OE input is low, all outputs are placed in the high-impedance (Hi-Z) state. To ensure the Hi-Z state during power-up or power-down periods, tie OE to GND through a pull-down resistor. The minimum value of the resistor is determined by the current-sourcing capability of the driver.

• No direction-control signal needed
• No power-supply sequencing required - Either VCCA or VCCB can be ramped first
• Latch-up performance exceeds 100mA per JESD 78, class II
• Green product and no Sb/Br

Полупроводники - Микросхемы\Логика\Схемы Сдвига Уровня

Технические параметры